946419 Removing and installing fog lights

WM 946419 Removing and installing fog lights

Preliminary work

Preliminary work for fog lights

Removing front apron. -> 631519 Removing and installing front apron - section on "Removing"

Removing fog lights

1. Disconnect the electric connector for the direction indicator light on the fog light and unscrew the two fastening screws -1- for the fog light.





Unscrewing fastening screws on fog light

2. Release the electric connector for the fog light -a- and pull it off. Remove the fog light from the front apron.





Releasing electric connector and removing fog light

Installing fog lights

1. Position the fog light on the front apron and secure in place with the two fastening screws -1-.





Securing fog light and connecting electric plug connection

Information

Check the breather hose -1- for signs of damage and check that it is seated securely.





Checking breather hose

If in doubt, replace the breather hose.

2.
3. Connect the electric connector to the fog light until the connector engages securely.
4. Plug the electric connector for the direction indicator light into the fog light.

Subsequent work

Subsequent work for fog lights

Installing front apron. -> 631519 Removing and installing front apron - section on "Installing"
1. Set the fog light. -> 946419 Removing and installing fog lights - section on "Adjusting"

Setting the fog lights

Information

When installing a new fog light, the setting must be checked using a headlight adjustment unit and re-adjusted if necessary.

1. Insert a Torx socket wrench through the ventilation openings in the front apron and set the auxiliary headlight.





Setting the fog light