943119 Removing and installing tail light

WM 943119 Removing and installing tail light

Technical values





Removing tail light





Installation position

1. Loosen the fastening screws -1- for the tail light.





Unscrewing fastening screws

2. Lift the tail light at the bottom, grip it at the front sides and pull it back out of the guide.





Removing tail light from guide

3. Release the electric connector on the tail light -A- and pull it off.





Unplugging electric connector

4. Remove tail light.

Installing tail light

1. Push the central connector for the tail light together until the connector engages securely.





Inserting connector

2. Install tail light.





Installing tail light

2.1. Slide the outside of the tail light into the holder at the side.
2.2. Engage the inside of the tail light.
2.3. Position the tail light according to the size of the gap and screw in the top fastening screw -1- first. => Tightening torque: 5 Nm (3.5 ftlb.)+10 %-15 %
2.4. Tighten the bottom fastening screw -1-. => Tightening torque: 5 Nm (3.5 ftlb.)+10 %-15 %