943319 Removing and installing bulb for rear light

WM 943319 Removing and installing bulb for rear light

Preliminary work

1. Remove rear light -> 943119 Removing and installing rear light - section on "Removing" 943119 Removing and installing tail light

Removing bulb for rear light





Installation position of bulb for rear light





Overview of bulb for rear light





1. Open the bulb holders with the bayonet lock -Arrow A- and take them out of the rear light -Arrow B-.





Removing bulb holder with bulb

2. Press the bulbs into the bulb holders -Arrow A- , turn them anti-clockwise -Arrow B- and take them out of the bulb holders -Arrow C-.





Removing bulb from bulb holder

Installing bulb for rear light

Information

All three bulbs are two-filament bulbs with offset locking pins. Always insert the bulb at the correct position in the bulb holder!

1. Press the bulbs into the bulb holder -Arrow A- and turn them -Arrow B- until the bulbs engage securely in the bulb holders.





Installing bulb in bulb holder

2. Insert the bulb holders with the bulbs into the rear light -Arrow A- and lock them -Arrow B-.





Securing bulb holder with bulb in rear light

Subsequent work

Install rear light. -> 943119 Removing and installing rear light - section on "Installing" 943119 Removing and installing tail light