Convertible Top Deck Lid Position Switch / Sensor: Service and Repair

WM 618119 Removing and installing microswitch for convertible-top compartment lid drive

Preliminary work

1. Remove motor for convertible-top compartment lid drive. -> 617019 Removing and installing drive motor - section on "Removing" 61701900 Removing and installing convertible-top compartment lid drive

Removing microswitch for convertible-top compartment lid drive

1. Unscrew the three fastening screws -7, 8- for the microswitch holder.





Unscrewing fastening screws for microswitch holder

2. Lift the holder -B- out.
3. If necessary, replace microswitch complete with holder.

Installing microswitch for convertible-top compartment lid drive

1. Mount the new microswitch with holder -B- on the convertible-top compartment lid drive and tighten with the fastening screws -7, 8-.





Unscrewing fastening screws for microswitch holder

Subsequent work

1. Install motor for convertible-top compartment lid drive. -> 617019 Removing and installing drive motor - section on "Installing" 61701900 Removing and installing convertible-top compartment lid drive