Hazard Warning Switch: Service and Repair

WM 944719 Removing and installing hazard warning light switch

Removing hazard warning light switch

Information

The hazard warning light switch is located in the middle air vent.





Overview of hazard warning light switch

1. With a screwdriver through the top air slot, release the left and right retaining clip -A- and pull the air vent out of the dashboard.





Releasing the air vent

2. Pull apart the electrical plug connections and remove the air vent.





Electrical connectors

3. Unclip and remove hazard warning light switch from the air vent.

Installing hazard warning light switch

1. Position hazard warning light switch and press it into the air vent.
2. Push together the electrical plug connections.





Electrical connectors

3. Observe the line routing and insert the air vent into the dashboard until it clicks into place.
4. Check function of air vent illumination, air vent adjustment and the hazard warning light switch.