942319 Removing and installing halogen bulb

WM 942319 Removing and installing halogen bulb

Preliminary work

Remove main headlight. -> 941519 Removing and installing headlight - section on "Removing" 94151900 Removing and installing main headlight

Removing halogen bulb

Removing cap of main headlight

1. Unscrew four fastening screws -1- from the cap.





Fastening screws for cap

2. Release cap once at the top and twice at the bottom -a- and remove from the main headlight.





Releasing cap

Removing halogen bulb





Installation position shown on the 911 headlight





1. Disengage securing clip.





Disengaging securing clip

2. Pull electrical connector off bulb and remove bulb.





Pulling off electrical connector

Removing high beam halogen bulb





Installation position shown on the 911 headlight





1. Unscrew high beam bulb, bayonet lock counter-clockwise.





Unscrewing bayonet lock

2. Unclip electric connector -a- and unplug.





Unplugging electrical connector

Installing halogen bulb

Installing main headlight cap

1. Position cap on main headlight and press into place, making sure that the cap engages once at the top and twice at the bottom.





Positioning cap

2. Screw in four fastening screws -1- for the cap.





Screwing in the fastening screws

Subsequent work

Install main headlight. -> 941519 Removing and installing headlight - section on "Installing" 94151900 Removing and installing main headlight

Carry out functional check of headlights.