Rear Bumper: Service and Repair

WM 635019 Removing and installing rear bumper

Technical values





Preliminary work

1. Remove rear apron. -> 635519 Removing and installing rear apron - section on "Removing"

Removing rear bumper

1. Unscrew fastening screws -1-.
2. Remove bumper.





Removing bumper

Installing rear bumper

1. Fit the bumper and screw in fastening screws.
2. Tighten fastening screws to => Tightening torque: 80 Nm (59 ftlb.)+/-2 Nm (+/-1.5 ftlb.).

Subsequent work

1. Install rear apron. -> 635019 Removing and installing rear bumper - section on "Installing"