Rear Door: Adjustments

WM 585115 Adjusting rear door

Tools





Technical values





















Technical values

Gap dimensions of rear door

=> Gap dimension: 4.2 mm+/-1 mm

B-pillar trim on front door to B-pillar trim on rear door
=> Gap dimension: 0 mm+0.5 mm-1.5 mm

B-pillar trim on front door to B-pillar trim on rear door
=> Gap dimension: 4.2 mm+/-0.8 mm

Front door to rear door
=> Gap dimension: 0 mm-1 mm

Front door to rear door
=> Gap dimension: 5.7 mm+1.2 mm-1 mm

Front door panel to rear door panel
=> Gap dimension: 0 mm+0.5 mm-1.5 mm

Front door panel to rear door panel
=> Gap dimension: 4.8 mm+/-1.5 mm

Door panel to door entry guard
=> Gap dimension: 0.3 mm+0.5 mm-1.5 mm

Door panel to door entry guard
=> Gap dimension: 3.7 mm+/-0.5 mm

Rear door to side panel
=> Gap dimension: 0 mm-1 mm

Rear door to side panel
=> Gap dimension: 3.8 mm+/-1 mm

C-pillar trim on rear door to C-pillar trim on side window
=> Gap dimension: 0 mm+0.5 mm-1.5 mm

C-pillar trim on rear door to C-pillar trim on side window
=> Gap dimension: 5.6 mm+/-2 mm

Door moulding to side panel
=> Gap dimension: 0 mm+2 mm

Door moulding to side panel


Adjusting rear door

Adjusting rear door

WARNING

Incorrect handling of safety bolts

- Danger of injury
- Loss of torque

-> Always use new fastening screws and nuts following removal.
-> Observe specified tightening torques.
-> Carry out a visual inspection of all re-used parts.

Information

Only tighten the fastening screws on the door hinges hand-tight from the inside until the doors are set correctly.

Information

- Set gap dimensions on the lids, doors and covers, or accessories in accordance with the gap specifications.

- Given a clearance in the openings that is too great or too small, the movable body parts or the accessories must be centred accordingly.

- Ensure that the gaps do not run in a wedge-shaped fashion or do not narrow at local points.

- You can use star gauges for body gap dimensions NR.127-1 for this.

- The given values are guidelines which should be observed as far as possible.

- The guidelines apply to repair and assembly work.

Information

- The door hinge must be aligned after installing the door.

- Loosen fastening screws for door hinge at the door and fastening screws for door hinge at the B-pillar so that the threaded connections can be moved.

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Adjust the rear door with door hinge at the door.





Rear door hinge on door side





2. Adjust the rear door with door hinge at the body.





Detaching rear door hinge on body side at the inside





Detaching rear door hinge on body side at the outside






3. Adjust the rear door with striker pin.





Adjusting striker pin






Checking rear door lock

1. Check the function of the rear door lock.
2. Check closing and opening forces and compare with the other doors.
If these forces differ, readjust the door.