558619 Removing and Installing Lower Part of Rear Lid Lock

WM 558619 Removing and installing lower part of rear lid lock

Technical values





Preliminary work

Remove cover for rear lock support. -> 703919 Removing and installing cover for rear lock support - section on "Removing" 703919 Removing and installing cover for rear lock support

Removing

Removing lower part of rear lid lock

1. Mark installation position of lower part of rear lid lock -1-.





Removing lower part of lid lock

2. Unscrew fastening screws -2- for lower part of lid lock -1-.
3. Remove lower part of lid lock.

Installing

Installing lower part of rear lid lock

1. Position lower part of lid lock -1- in line with the marking.





Installing lower part of lid lock

2. Screw in fastening screws -2-. => Tightening torque: 18 Nm (13 ftlb.)
3. Check adjustment of rear lid and re-adjust it if necessary. -> 559015 Adjusting rear lid - section on "Adjusting" Adjustments

Subsequent work

Install cover for rear lock support. -> 703919 Removing and installing cover for rear lock support - section on "Installing" 703919 Removing and installing cover for rear lock support