Power Mirror Motor: Service and Repair

WM 668219 Removing and installing mirror adjusting motor

Preliminary work

1. Remove mirror glass.-> 667819 Removing and installing mirror glass - section on "Removing" 667819 Removing and installing mirror glass

Removing mirror adjusting motor

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.





Installation position of mirror adjusting motor

1. Unscrew three fastening screws -1- for the mirror adjusting motor.





Removing mirror adjusting motor

2. Pull off electric plug connection.





Pulling off plug connection

Installing mirror adjusting motor

1. Plug in electric plug connection until it engages securely.





Connecting plug connection

2. Place mirror adjusting motor in installation position.
3. Secure mirror adjusting motor with three fastening screws -1-.





Installing mirror adjusting motor

Subsequent work

1. Install mirror glass. -> 667819 Removing and installing mirror glass - section on "Installing" 667819 Removing and installing mirror glass