278519 Removing and installing control unit for distance measuring sensor

WM 278519 Removing and installing control unit for distance measuring sensor

Removing control unit for distance measuring sensor





Installation position (shown on the Panamera)

1. Switch off ignition and remove the remote control from the ignition lock.
2. Remove cover on sensor.





Removing cover on sensor

2.1. Release cover twice at the top -arrow-.
2.2. Fold cover forwards and detach at the bottom holder.
3. Release two electric plug connections -a- and disconnect connector from control unit for distance measuring sensor.





Disconnecting plug connection

4. Unscrew the two fastening screws -1- from holder for control unit for distance measuring sensor.





Unscrewing fastening screws (shown on the Panamera)

5. Twist holder together with control unit for distance measuring sensor, release cable clip -2- and remove the electric line.





Open cable clip and remove line (shown on the Panamera)

6. Remove holder together with control unit for distance measuring sensor.

Installing control unit for distance measuring sensor

1. Position holder together with control unit for distance measuring sensor.
2. Place electric line into cable clip -2- and clip together.





Securing electric line with cable clip (shown on the Panamera)

3. Position holder on bumper and secure using the two fastening screws -1-.





Securing bracket

4. Press in the electric plug until it clicks into place.
5. Fit cover for distance measuring sensor.





Fitting ACC sensor cover (shown on the Panamera)

Subsequent work

Subsequent work after removing and installing control unit for distance measuring sensor

If the control unit for the distance measuring sensor was removed and installed or replaced, the control unit for the distance measuring sensor will need to be readjusted on a measuring platform using adjustment tool VAS 6430. -> 278515 Adjusting control unit for distance measuring sensor Adjustments.