946419 Removing and installing fog lights

WM 946419 Removing and installing fog lights

Preliminary work

Only with charge air cooler:
1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"

Removing fog lights

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.





Installation position of fog light

The work steps are the same for the left and right fog lights.
1. Release electrical plug connection -1- at the fog light using a screwdriver -a- and pull it off -A-.





Disconnecting plug connection at fog light

2. Unscrew two fastening screws -1-.





Fog light mounting

3. Remove fog light -2-.

Installing fog lights

1. Insert fog light -2-.





Installing fog light

2. Screw in two fastening screws -1-.
3. Plug in electrical plug connection -1- in the direction of the arrow -arrow- until the connector engages securely.





Plugging in plug connection

Subsequent work

Only with charge air cooler:
1. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"