947119 Removing and installing auxiliary headlight

WM 947119 Removing and installing auxiliary headlight

Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"

Removing auxiliary headlight





Installation position of auxiliary headlight

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

1. Release electric plug connection -a- and pull it off -A-.





Disconnecting connector from auxiliary headlight

2. Unscrew two fastening screws -1-.





Removing auxiliary headlight

3. Loosen two clips -2- and remove auxiliary headlight by pulling it forward out of the front apron.

Installing auxiliary headlight

1. The auxiliary headlight is installed in reverse order to removal.

Subsequent work

1. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"