Power Mirror Switch: Service and Repair

WM 665419 Removing and installing switch for rear-view mirror

Preliminary work

1. Remove armrest for front door panel. -> 705919 Removing and installing armrest for front door panel - section on "Removing" 705919 Removing and installing armrest for front door trim panel

Removing switch for rear-view mirror

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.





Installation position of switch for rear-view mirror

1. Unclip the complete switch -1- using a plastic wedge.





Levering out switch

2. Release electric plug connection -a- and pull it off the switch for power windows -A-.





Pulling off electric plug connection

Installing switch for rear-view mirror

The switch for rear-view mirror is installed in reverse order to removal.

Subsequent work

1. Remove armrest for front door panel. -> 705919 Removing and installing armrest for front door panel - section on "Installing" 705919 Removing and installing armrest for front door trim panel