695719 Removing and installing switch for airbag

WM 695719 Removing and installing switch for airbag

Preliminary work

Disconnect the battery. -> 2X00IN Work instructions after disconnecting the battery 2X00IN Work instructions after disconnecting the battery.

Removing switch for airbag

Information

- To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.





Installation position of switch for airbag

1. Open glove compartment lid.
2. Carefully unclip switch for airbag at the top and bottom -arrow-.





Removing switch for airbag

3. Release electric plug connection for airbag switch -a- and pull it off -A-.





Unplugging connector on airbag switch

Installing switch for airbag

The switch for airbag is installed in reverse order to removal.

Subsequent work

Connect the battery. -> 2X00IN Work instructions after disconnecting the battery 2X00IN Work instructions after disconnecting the battery.