Telescoping Wheel Switch: Service and Repair

WM 482919 Removing and installing switch for height and fore-and-aft adjustment

Removing switch for height and fore-and-aft adjustment

Information

The switch for height and fore-and-aft adjustment is located on the bottom of the steering column casing.

1. Insert a suitable flat screwdriver into the slit -1-.





Inserting screwdriver

2. Press the clip back using the flat screwdriver.
3. Pull the switch -2- down out of the way.
4. Unplug electric plug connection -1-.





Pulling off connector

Installing switch for height and fore-and-aft adjustment

1. Plug in electric plug connection -1-.





Plugging in connector

2. Insert switch -2- at the bottom first.
3. Press the switch -2- into the trim panel until the clip -1- engages securely.





Pressing in switch