Power Interrupt Connector/Switch: Service and Repair

WM 966015 Switching on main power supply switch

Tools





Switching on main power supply switch

Information

The main switch for the power supply must be switched on before the vehicle handover may be started with PIWIS Tester II 9818.

- The main switch for the power supply is in the power distributor.

- The power distributor is located under the driver's seat on the left in the direction of travel.

1. Move the driver's seat back as far as it will go.
2. There is a slotted opening in the carpet in front of the driver's seat.
The power distributor is located under the carpet.
3. Slide the switch on the power distributor towards the rear in direction of travel.
Actuate the switch through the cut-out in the carpet.
The main switch for the power supply is then switched on.
4. Perform vehicle handover.