Power Window Switch: Service and Repair

WM 645819 Removing and installing switch for front power windows

Preliminary work

1. Remove armrest for front door panel. -> 705919 Removing and installing armrest for front door panel - section on "Removing" 705919 Removing and installing armrest for front door trim panel

Removing switch for front power windows

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.





Installation position of switch for front power windows

1. Unclip the complete switch -1- using a plastic wedge.





Levering out switch

2. Release electric plug connection -a- and pull it off the switch -A-.





Pulling off electric plug connection

Installing switch for front power windows

The switch for front power windows is installed in reverse order to removal.

Subsequent work

1. Install armrest for front door panel. -> 705919 Removing and installing armrest for front door panel - section on "Installing" 705919 Removing and installing armrest for front door trim panel