P0119

P0119

Diagnosis information - Control unit DME (DFI)

Coolant temperature sensor Engine : Intermittent contact

Diagnostic conditions
- Ignition on
- none of the following faults stored: P0117, P0118

Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+/ground/between lines or open circuit in the lines
- Coolant temperature sensor Engine Faulty

Fault setting condition(s)
- Coolant temperature Engine : Actual-value jumps > 3 °C (°F)

Fault effects
- Substitute value = Last actual value that was recognized as OK. , at:
- Actual-value jumps > 9.75 °C (°F)