Rear Shelf: Service and Repair

WM 684819 Removing and installing cover for rear tray

Preliminary work

Preliminary work for removing and installing cover for rear tray

1. Remove oddments tray. -> 681619 Removing and installing oddments tray - section on "Removing" Service and Repair

Removing cover for rear tray

1. Unscrew fastening screws -2- from cover -1- for rear tray.





Screws on rear cover

2. Tilt cover -1- backwards -A-.
Make sure that the bore in the base of the cover is above the front locating peg -2-.





Removing cover

3. Pull cover -1- forward and remove it -B-.

Installing cover for rear tray

1. The cover of the rear tray is installed in reverse order to removal.
When installing the cover -1- , make sure that the outer guides -2- of the rear cover fit into the cut-outs -3- on the centre console and the inner guides -4- are around the rear locating peg -5-.





Installing cover

Subsequent work

Subsequent work for removing and installing cover for rear tray

1. Install oddments tray. -> 681619 Removing and installing oddments tray - section on "Installing" Service and Repair