856519 Removing and Installing Ventilation Cover

WM 856519 Removing and installing ventilation cover

Preliminary work

1. Remove rear apron. -> 635519 Removing and installing rear apron - section on "Removing"

Removing ventilation cover

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.





Installation position of ventilation cover

1. Insert a plastic wedge between the vehicle body and the ventilation cover at the bottom.





Inserting plastic wedge

2. Pull the lower edge of the ventilation cover outwards.





Pressing ventilation cover outwards

3. Remove ventilation cover.

Installing ventilation cover

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Position the ventilation cover at the top and press it in until the locking lugs engage securely. Check that the seal is seated securely.





Pressing in ventilation cover

Subsequent work

1. Install rear apron. -> 635519 Removing and installing rear apron - section on "Installing"