370419 Removing and installing selector knob

WM 370419 Removing and installing selector knob

Removing selector knob

Information

The release button must not be pressed while removing and installing the selector knob.

1. Turn locking mechanism at bottom of selector knob -A- by 45 degrees in direction of arrow and pull selector knob up and off -B-.





Removing selector knob

Installing selector knob

Information

The release button must not be pressed while removing and installing the selector knob.

1. If a new selector knob is to be installed, the red locking pin must be removed beforehand.





Selector knob lock

2. Fit selector knob onto the gear selector rod -A-.





Installing selector knob

3. Turn locking mechanism at bottom of selector knob by 45 degrees in direction of arrow and lock selector knob -B-.