947119 Removing and installing auxiliary headlight

WM 947119 Removing and installing auxiliary headlight

Removing auxiliary headlight





Installation position of auxiliary headlight

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Remove the ignition key and switch off load before disconnecting or removing load.

1. Unclip cover from the front apron -arrow-.





Removing cover

2. Loosen auxiliary headlight.
2.1. Unscrew the two fastening screws -1 -.
2.2. Pull out the auxiliary headlight -arrow- until the connector is accessible.





Loosening auxiliary headlight

3. Release connector -arrow A- and pull it off the auxiliary headlight -arrow B-





Pulling off connector

Installing auxiliary headlight

1. Push connector onto the auxiliary headlight -arrow- until it engages securely.





Plugging in connector

2. Insert auxiliary headlight into the front apron -arrow- and secure with the two fastening screws -1-.





Securing auxiliary headlight

3. Insert cover into the front apron with the guides and clip it in -arrow-





Installing cover