General Panamera V6

General Panamera V6

V6 engine specifications
DME control unit EMS SDI 7.1
Displacement 3.6 liters
Power 300 Hp/220kW
Torque 400 Nm
Compression ratio 12.5
Idle speed 635 rpm
Max. engine speed 6,700 rpm
VarioCam Plus 0 - 50° crank angle










Development objectives for the V6 DFI engine:
High engine power
High maximum torque
Low fuel consumption
Low emissions

The objectives were realised by the following measures:
Thermal management
Auto Start Stop function
Variable deceleration fuel cutoff
Vehicle electrical system recuperation
Reduced component weight







The current V8 engine of the Panamera S, 4S and Turbo models already features a host of innovative technologies and concepts. These have been adopted in the V6 engine and further enhanced. Newly developed, highly efficient 3.6 l V6 engines are used in the new Panamera and Panamera 4. These engines were based on the units installed in the V8 models. Like the latter, they have a fully aluminum design and feature direct fuel injection (DFI) and VarioCam Plus. As a result, the Panamera and Panamera 4 develop a power output of 300 hp / 220 kW at 6,500 rpm and a maximum torque of 400 Nm at 3,750 rpm.