Headlamp Switch: Service and Repair

WM 940519 Removing and installing main light switch

Preliminary work

1. Remove moulding for left instrument panel. -> 705819 Removing and installing moulding for dashboard - section on "Removing" 705819 Removing and installing moulding for dashboard

Removing main light switch





Installation position of main light switch

1. Switch off ignition and remove remote control.
2. Release the main light switch by turning it -A- and then remove it -B-.





Removing main light switch

3. Disconnect plug connection for main light switch.





Disconnecting plug connection

Installing main light switch

1. Connect plug connection.





Connecting plug connection

2. Check that the plug connection is seated securely.
3. Insert main light switch into the cut-out and lock it by turning it.





Installing main light switch

4. Perform a function test.

Subsequent work

1. Install moulding for left instrument panel. -> 705819 Removing and installing moulding for dashboard - section on "Installing" 705819 Removing and installing moulding for dashboard