947819 Removing and installing front angle sensor for headlight beam adjustment

WM 947819 Removing and installing front angle sensor for headlight beam adjustment

Removing and installing front angle sensor for headlight beam adjustment

1. The procedure for removing and installing the angle sensor for headlight beam adjustment is described under -> 431855 Replacing front level sensor 431855 Replacing front level sensor

Calibrating angle sensor for headlight beam adjustment

Information, measuring points, procedure, and conditions for calibration: -> 430115 Calibration Programming and Relearning
1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition.
2. Select vehicle type using the cursor keys.
3. Select Level control/PASM using the cursor keys.
4. Select the Maintenance/repairs menu and run the function for calibrating the level sensor.
5. Read out fault memory.