Operation CHARM: Car repair manuals for everyone.

Power Window Switch: Service and Repair


WM 645819 Removing and installing switch for front power windows

Preliminary work

Remove front door panel. -> 705919 Removing and installing front door panel - section on "Removing" 705919 Removing and installing front door panel

Removing switch for front power windows

Information

Prior to starting with the removal, switch off the ignition and remove the ignition key.





Installation position of switch

1. Release the electric connector at the switch -a- and remove it -arrow B-.





Pulling off electric connector

2. Unclip the switch -arrows-.





Unclipping switch

3. Pull the switch out of the trim panel from behind -arrow-.





Pulling out switch

Installing switch for front power windows

1. Position the switch and slide it in until the clips engage securely -arrow-.





Sliding in switch

2. Make sure that all the clips engage securely -arrows-.





Engaging clips

3. Insert electric connector at the switch -arrow- until the connector engages securely.





Plugging in electric connector

Subsequent work

Install front door panel. -> 705919 Removing and installing front door panel - section on "Installing" 705919 Removing and installing front door panel