97321903 Removing and installing wire harness for door in front door panel

WM 973219 Removing and installing wire harness for door in front door panel

Information

Component information - front door





Installation position of wire harness for front door





Preliminary work

Preliminary work for front door panel

1. Remove front door panel. -> 705919 Removing and installing front door panel - section on "Removing" 705919 Removing and installing front door panel

Removing wire harness for door in front door panel

Information

The number of plug connections can vary, depending on equipment.

1. Carefully detach insulating mat at the bonding points and remove it.





Detaching insulating mat

2. Disconnect electric plug connections.
2.1. Pull off electric plug connection for alarm system LED -1-.





Pulling off connector on alarm system LED

2.2. Release light for door opener -A- and pull it off -B-.





Pulling off light for door opener

2.3. Release electric plug connection for mid-range loudspeaker -a- and pull it off -B-.





Pulling off connector on mid-range loudspeaker

2.4. Release electric plug connection for power windows switch -a- and pull it off -B-.





Pulling off connector on power windows

2.5. Release light for storage box -A- and pull it off -B-.





Pulling off light for storage box

3. Unclip fixing clips for wire harness.





Unclipping fixing clips

Installing wire harness for door in front door panel

Information

The number of plug connections can vary, depending on equipment.

1. Secure fixing clips.





Securing fixing clips

2. Plug in electric plug connections.
2.1. Plug in light for storage box until it engages securely.





Plugging in light for storage box

2.2. Plug in electric plug connection for power windows switch until it engages securely.





Plugging in connector on power windows switch

2.3. Plug in electric plug connection for mid-range loudspeaker until it engages securely.





Plugging in connector on mid-range loudspeaker

2.4. Plug in light for door opener until it engages securely.





Plugging in light for door opener

2.5. Plug in plug connection for alarm system LED -1-.





Plugging in connector on alarm system LED

3. Fit insulating mat and affix it securely to the bonding points with hot-melt adhesive.

Subsequent work

Subsequent work for front door panel

1. Install front door panel. -> 705919 Removing and installing front door panel - section on "Installing" 705919 Removing and installing front door panel