Operation CHARM: Car repair manuals for everyone.

97321907 Removing and installing wire harness for door in rear door panel


WM 973219 Removing and installing wire harness for door in rear door panel

Information

Component information - rear door





Installation position of wire harness for rear door





Preliminary work

Preliminary work for rear door panel

1. Remove rear door panel. -> 707319 Removing and installing rear door panel - section on "Removing" 707319 Removing and installing rear door panel

Removing wire harness for door in rear door panel

Information

The number of plug connections can vary, depending on equipment.

1. Carefully detach insulating mat at the bonding points and remove it.





Detaching insulating mat

2. Disconnect electric plug connections.
2.1. Release light for door opener -A- and pull it off -B-.





Pulling off light for door opener

2.2. Pull off light for ashtray -1-.





Pulling off connector on ashtray

2.3. Pull off electric plug connection for power windows switch.





Pulling off connector on power windows

2.4. Pull off electric plug connection for door warning light.





Pulling off connector for door warning light

3. Unclip fixing clips for wire harness.





Unclipping fixing clips

Installing wire harness for door in rear door panel

Information

The number of plug connections can vary, depending on equipment.

1. Secure fixing clips.





Securing fixing clips

2. Plug in electric plug connections.
2.1. Plug in electric plug connection for door warning light until it engages securely.





Plug in connector on door warning light

2.2. Plug in electric plug connection for power windows switch. Check that it is seated securely.





Plugging in connector on power windows switch

2.3. Plug in light for ashtray -1- until it engages securely.





Plugging in light for ashtray

2.4. Plug in light for door opener until it engages securely.





Plugging in light for door opener

3. Fit insulating mat and affix it securely to the bonding points with hot-melt adhesive.

Subsequent work

Subsequent work for rear door panel

1. Install rear door panel. -> 707319 Removing and installing rear door panel - section on "Installing" 707319 Removing and installing rear door panel