Parking Assist Distance Sensor: Service and Repair

WM 917519 Removing and installing sensor for ParkAssist

Preliminary work

Preliminary work for front sensor for ParkAssist

1. Outer sensors: Remove front part of front wheel housing liner. -> 505619 Removing and installing front wheel housing liner - section on "Removing" Service and Repair
2. Inner sensors: Remove the front apron. -> 505619 Removing and installing front wheel housing liner - section on "Installing" Service and Repair

Preliminary work for rear sensor for ParkAssist

1. Remove rear apron. -> 635519 Removing and installing rear apron - section on "Removing"

Removing sensor for ParkAssist

1. Press bracket apart -A- and remove sensor -B-.





Removing sensor for ParkAssist

2. Release and disconnect connector at the sensor -b-.





Disconnecting sensors for ParkAssist

Installing sensor for ParkAssist

1. Plug in connector for sensor until it engages securely.





Connecting sensors for ParkAssist

2. Fit sensor into the bracket.





Fitting sensor for ParkAssist

Subsequent work

Subsequent work for front sensor for ParkAssist

1. Outer sensors: Install front part of front wheel housing liner. -> 505619 Removing and installing front wheel housing liner - section on "Installing" Service and Repair
2. Inner sensors: Install the front apron. -> 631519 Removing and installing front apron - section on "Installing"

Subsequent work for rear sensor for ParkAssist

1. Install rear apron. -> 635519 Removing and installing rear apron - section on "Installing"