975919 Removing and installing wire harness for ParkAssist

WM 975919 Removing and installing wire harness for ParkAssist

Preliminary work

1. Remove rear apron. -> 635519 Removing and installing rear apron - section on "Removing"

Removing wire harness for ParkAssist





Installation position of wire harness for ParkAssist

1. Release -b- and unplug connectors on the four ParkAssist sensors.





Disconnecting ParkAssist sensors

2. Release the wire harness from the outer and middle fixing clips.





Loosening outer clips





Loosening middle clips

3. Loosen the two inner fixing clips from the rear apron using a screwdriver.





Loosening inner fixing clips

4. Remove wire harness for ParkAssist.

Installing wire harness for ParkAssist





Installation position of wire harness for ParkAssist

1. Position the wire harness and secure with the two inner fixing clips.





Attaching inner fixing clips

2. Secure wire harness for ParkAssist by closing the middle and outer clips.





Fastening middle clips





Fastening outer clips

3. Plug connectors into the four ParkAssist sensors until the connectors engage securely.





Connecting ParkAssist sensors

Subsequent work

1. Install rear apron. -> 635519 Removing and installing rear apron - section on "Installing"