Front Fender Liner: Service and Repair

WM 505619 Removing and installing front wheel housing liner.

Technical values





Preliminary work

Preliminary work

1. Remove front wheel. -> 440519 Removing and installing wheel - section on "Removing"

Removing front wheel housing liner

Removing front wheel housing liner - rear section





Installation position of front wheel housing liner

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening nuts -1- and fastening screws -2-.





Removing front wheel housing liner - rear section
2. Remove wheel housing liner -A-.

Remove front wheel housing liner - front section





Installation position of front wheel housing liner

Information

The front part of the wheel housing liner can also be removed without disassembling the front wheels.

1. Unscrew fastening screws -2, 3- and remove wheel housing liner -B-.





Removing wheel housing liner part B

Installing front wheel housing liner

Install front wheel housing liner - front section





Installation position of front wheel housing liner

Information

- Push in wheel housing liner toward the outside up to contact in wing stop position.

- Ensure that the right wheel housing liner is guided through the opening on the wheel well.

1. Insert wheel housing liner -B-.





Fasten wheel housing liner part B
2. Screw in fastening screws -2- and tighten -> Final tightening: 2 Nm (ftlb.) (1.5).
3. Screw in fastening screws -3- and tighten -> Final tightening: 2.8 Nm (ftlb.) (1.8).

Installing front wheel housing liner - rear section





Installation position of front wheel housing liner

Information

- Push in wheel housing liner toward the outside up to contact in wing stop position.

- Ensure that the right wheel housing liner is guided through the opening on the wheel well.

1. Insert wheel housing liner -A-.





Removing front wheel housing liner - rear section
2. Screw on fastening nuts -1- and tighten to the specified tightening torque-> Final tightening: 1.5 Nm (1.0 ftlb.).
3. Screw in fastening screws -2- and tighten to the specified tightening torque-> Final tightening: 2 Nm (1.5 ftlb.).

Subsequent work

Subsequent work

1. Fit front wheel. -> 440519 Removing and installing wheel - section on "Installing"

-------------------------------------------------------------------------------

997110, 997111, 997120, 997121, 997140, 997141, 997310, 997311, 997320, 997321, 997350, 997351, 997360, 997361, 997370, 997410, 997411, 997430, 997431, 997460, 997461, 997510, 997511, 997520, 997521, 997560, 997561, 997610, 997611, 997620, 997621, 997660, 997661, 997720, 997721

Model year as of 2005
C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C45, C46, C96, C97, C98, C99