P0242

P024200

Diagnosis information DME control unit

Sensor 2 Boost pressure

DANGER
High voltage.
Death or severe injuries due to high voltage or high current.

- De-energise the vehicle in accordance with the guidelines.
- Work must not be performed on parts carrying a high voltage.

Diagnostic conditions
The control unit must be active in order to test internal function sequences and diagnosable inputs/outputs.
In the event of a fault, check whether the fault is permanently >present<. To perform the check, erase the fault memory, meet the diagnostic conditions and read out the fault memory again.
- In the Engine start

Possible fault causes
- Open circuit
- Implausible signal
- Short circuit to ground
- Short circuit to B+

Fault setting condition(s)
- Intake manifold pressure sensor 2 > mean value
- Intake manifold pressure sensor 2 < mean value

NOTE:
Diagnosis/Fault finding.
- Check of function using drive link test
- Short circuit to B+/mutual short circuit or open circuit in the lines