Cut-Out Clutch Below Limit Value

P304D00

Diagnosis information DME control unit

Cut-out clutch below limit value

Diagnostic conditions
The control unit must be active in order to test internal function sequences and diagnosable inputs/outputs.
In the event of a fault, check whether the fault is permanently >present<. To perform the check, erase the fault memory, meet the diagnostic conditions and read out the fault memory again.
- Ignition on

Possible fault causes
- Clutch Faulty
- Clutch Adaptation data forgotten

Fault effects
- No electric operation

NOTE:
Diagnosis/Fault finding.
--> Repeat adaptation Clutch