Cooling System - Coolant Dist. Housing And Coolant Pipe
151/12
ENU
1959
Sep 5, 2012
The present document was valid at the time of print. A later version may be available online
Spare Parts Requirements for Coolant Distributor Housing and Coolant Pipe (51/12)
Model year:
2013
Vehicle Type:
Boxster (981)/Boxster S (981)
Concerns:
Coolant distributor housing and coolant pipe
Information:
Impermissible mixed installation when spare parts are required
- Coolant distributor housing (also referred to as water guide housing) and
- Coolant pipe (also referred to as water tube).
Depending on the
^ engine number (for differentiation, see "Date of Introduction") and
^ part number (of the part installed in the vehicle)
the procedure described below must be followed in order to avoid installing the wrong parts together:
a) up to date of introduction of engine number and depending on the parts installed in the vehicle:
b) as of date of introduction of engine number and depending on the parts installed in the vehicle:
Date of Introduction:
Modified parts are installed from June 14, 2012 and as of the following engine numbers:
MA 1/22_D 01097 \01 2.7 l - Boxster
MA 1/23_D 00820 \01 3.4 l - Boxster S
Parts Info:
900.385.072.01 - NEW - --> Hexagon round-head bolt (M6 x 25 mm)
900.385.270.01 - OLD - --> Hexagon round-head bolt (M6 x 35 mm, still available)
9A1.106.022.02 --> Water guide housing
9A1.106.022.01 - OLD - --> Water guide housing (still available)
9A1.106.026.31 --> Water tube
9A1.106.026.30 - OLD - --> Water tube (still available)
981320, 981321, 981330, 981331
Model year 2013
C02, C36
Disclaimer