Programming and Relearning

NOTE: The electrically heated rear window, rear door fans and recirculation can only be programmed to the opposite of that which the AUTO program has selected at the time of programming.

The ACC control module can be user programmed. This means that manual selections can be programmed so that the ACC control module selects these after starting. Other features, that have not been manually selected during programming, will be controlled automatically.

Program as follows:
1. Compare the required manual selections with the buttons on the ACC control module panel.
2. Press the "DEF" and "VENT" buttons at the same time.

Cancel the program by pressing "AUTO" and "OFF" simultaneously. The LEDs and display flash on to confirm the programming/cancellation. User programming is stored even if power is lost to the ACC control module.