Window Switch Assembly - Microfiche Discrepancy
90saab07Subject: Window Switch Assembly
Application: 9000 US Edition 4, Grid 2-C08
CATEGORY Microfiche Discrepancy
SECTION PAGE
14 6
ISSUE CODE
11/90-0042 364
The information for the switch assembly used on the 9000 without a sunroof has been left off of the microfiche. See below for correct information.
1) Carefully align the appropriate microfiche card on the matrix above.
2) The black square will appear directly on the grid(s) to be marked.
3) Using a red "El Marko" permanent pen (or similar type) mark the fiche square(s).
Note:
If you use a fine tipped pen you can write the position number where the error is. This will save looking up microfiche discrepancies unnecessarily.
Unless fiche are correctly marked, the microfiche discrepancy system will be of little help in your parts department. Use the system and avoid costly ordering errors.