Manual Transmission/Transaxle: Technical Service Bulletins

• Customer Interest
  • M/T - Grinds When Engaging Reverse Gear
  • M/T - Jumping Out of 5th Gear
  • M/T - Difficult 5TH Gear Disengagement
  • M/T - Reverse Gear Block-Out
  • M/T - Slipping Out of Gear
  • Gear Lever Knob - Loose
• All Technical Service Bulletins
  • M/T - Loctite 510 Availability
  • M/T - Grinds When Engaging Reverse Gear
  • Tools - Modification for 9000 M/T
  • M/T - Jumping Out of 5th Gear
  • M/T - Difficult 5TH Gear Disengagement
  • M/T - Reverse Gear Block-Out
  • M/T - Adjustment of Output Shaft Bearing Tension
  • Speedometer - Gear Application
    • Overview
    • Identification of Gears
    • Check of Speedometer Gears On Replacement Gearbox
    • Transducer Inspection Procedure
    • Speedometer Gears Inspection Procedure
  • M/T - Slipping Out of Gear
  • M/T - Modify Gear Selector During Installation
  • Shift Rod Taper Pin - Special Tool
  • Gear Lever Knob - Loose
  • Gearbox Side Cover - Identification
  • Manual Gearbox - New Oil
    • Overview
    • Procedure -M93
    • Procedure -M94
    • Warranty Conditions