Reading Lamps Wiring Circuit

Reading Lamp Components:

Reading Lamp Diagrams:

Locations of components

3 Earthing point, facia
At the left-hand front speaker socket

22A Fuse board
Behind the access panel in the glove compartment

122 Eight-pole connector
Under the facia, to the extreme left (behind the knee shield)

225 Reading lamp
In the pillar between the rear side door and the rear window

226 Co-driver's lamp
In the roof console, at the inner rear-view mirror

231 Distribution terminal +54
In the electrical distribution box behind the glove compartment

Operation
Reading lamps for the back-seat passengers are provided in both pillars between the rear side doors and the rear window. A reading lamp for the co-driver is provided in the roof console at the inner rear-view mirror. The lamps are of spotlight type and can be switched on and off by means of a switch at each lamp.

The supply is taken from fuse 3 and is wired through lamp 226 to lamps 225.

Fault-tracing hints

1. Check fuse 3 and check that the supply to it is live.
2. Check the switch on each of the lamps.
3. Check connector i22 and the wiring and earth connections.