Windshield Washer Reservoir: Service and Repair

To Remove
1 Unhook the wire clip to release the right-hand direction indicator lens.
2 Remove the two bolts and remove the upper bracket.
3 Unplug the connector.
4 Jack up the car and remove the right-hand front wheel.
5 Remove the lower pant of the spoiler and the front section of the wing liner on the right-hand side.
6 Remove the two reservoir retaining nuts (adjacent to the receiver on cars with A/C).
7 Disconnect the hose and unplug the connector on the top of the evaporative emission canister and lift out the reservoir complete with wiring.

To Install
Install in reverse order.