Self-Arming

The theft alarm can be programmed for self-arming where the alarm automatically starts monitoring without the use of the remote control. There are two types of self-arming. For both alternatives, the time before the function becomes active should be specified. A so-called activation time must also be specified. The activation time is the time the 3 circuit breaking is active without the alarm being set off.

When the alarm is set off, the selected country code will apply. The LED will start its delay period according to the specified "TIME BEFORE ACTIVE." and then go over to indicating that the alarm is armed.

Programming

Self-arming
Connect the Intelligent Saab Tester (ISAT) scan tool.
Select "PROGRAMMING".
Select "SELF-ARMING" and then:
1 "OFF" in order to deselect self-arming.
2 "AT +15 OFF" to select the self-arming function to be connected when the ignition is "OFF".
3 "+15 OFF DOOR CLOSED" to select the self-arming function to be connected with the ignition "OFF" and the driver door closed.

Time before self-arming
1 Select "TIME BEFORE ACTIVE.".
2 Select time: 30, 60, 120, 180, 300 or 600 seconds as the time before the alarm self-arms.

Arming time
Select "ACTIVATION TIME": 30, 45 or 60 minutes.


Important : When self-arming has been selected, "self-immobilizing", or the so-called 3 circuit breaking will also be automatically included in the arming.