Self-Immobilization (3-Circuit Breaking)

The theft alarm can be programmed for self-immobilizing alone, and in this case, only the alarm 3 circuit breaking is activated. This happens automatically without the use of the remote control.

This function is only used when self-arming has been disabled. When self-arming is selected, the function is automatically included. Only two choices are possible and if the "ON" selection is made, it will be connected in accordance with the previously selected self-arming alternative. If no self-arming alternative is selected, the function will be connected when the ignition is off and the door closed.

When the function is active, this is indicated by the LED flashing 1 flash/second. This happens after "TIME BEFORE ACTIVE.".

Programming

Self-immobilizing
Connect the Intelligent Saab Tester (ISAT) scan tool.
Select "PROGRAMMING".
Select "SELF-IMMOBILIZING" and then:
1 "ON" to select self-immobilizing.
2 "OFF" to deselect self-immobilizing.

Time before self-immobilizing
1 Select "TIME BEFORE ACTIVE." if "ON" was selected above.
2 Select time: 30, 60,120, 180, 300 or 600 seconds as the time before the self-immobilizing is armed.

Immobilizing time
Select "ACTIVATION TIME": 30, 45 or 60 minutes.