Sunroof / Moonroof: Testing and Inspection

FAULT DIAGNOSIS HINTS
The sunroof is activated by turning the ignition switch to the Drive position.
1. Check that fuse 9 is intact and supplied with current.

A TIP
To avoid damaging the centre console, and to remove switch 386 from the centre console in the easiest possible way when taking readings, proceed as follows:
^ Where the cover part, the centre console and the carpet meet, there is a flap. If this is lifted slightly, a hand can be introduced under it to press out the switch from behind.

2. Check that current is supplied to switch 386, terminal 10.
3. Check that current is supplied from terminal 3 or 4 of switch 386 to stepping relay 232, motor 182 and the microswitch by moving the switch to different positions.
4. Check the connectors, wiring harness and ground connections.