Map Light

mYReading Lamps And Illuminated Vanity Mirrors:

WIRING DIAGRAM

Reading Lamps And Illuminated Vanity Mirrors: Component Location:

COMPONENT LOCATION VIEW

Reading Lamps And Illuminated Vanity Mirrors: Component ID:

COMPONENT ID
22A Fuse board behind the cover flap in the glove box.
53 Switch, interior lighting, in centre console by the gear lever.
72 Seat-belt warning lamp, in roof console above the interior rear-view mirror.
225 Reading lamp, in each C pillar.
226 Passenger reading lamp, in the roof console beside the interior rear-view mirror.
231 Distribution terminal (+54 circuit) in main fuse box behind the glove box.
359 Lighting, vanity mirror, in left-hand sun visor.
360 Lighting, vanity mirror, in right-hand sun visor.
373 Main switch, left-hand vanity mirror, beside the sun visor's inner mounting.
374 Main switch, right-hand vanity mirror, beside the sun visor's inner mounting.

1-Pin Connectors
H1-5 In the roof console, beside the interior rear-view mirror.
H1-6 In the roof console, beside the interior rear-view mirror.

10-Pin Connectors
H10-11 On the far left under the dashboard behind the knee shield

Grounding Points
G8 Grounding point, dashboard, beside the front left-hand speaker socket

DESCRIPTION OF OPERATION
Reading Lamps
Reading lamps for the rear seat passengers are provided in both C pillars. For the front seat passenger, a reading lamp is located in the roof console beside the interior rear-view mirror.

The lamps are of spotlight type and can be switched on and off by means of the switch beside each lamp.

Current is supplied via fuse 3 to lamp 226 and on to lamps 225.

Lighting For Vanity Mirrors
Cars for certain markets are equipped with lighting for the vanity mirrors in the car's sun visors. Lamps 359 and 360 are supplied with current via switches 373 and 374.

The switches are located beside the inner mounting of each sun visor. The lights go on when the sun visors are folded down but can turned off using the integral switches. The switches are controlled by the sliding cover in front of each mirror.

The fitting of switches 373 and 374 has been discontinued during the model year.

FAULT DIAGNOSIS HINTS
Reading Lamps
1. Check that fuse 3 is intact and supplied with current.
2. Check the switches on each lamp.
3. Check the connectors, wiring harness and ground connections.

Lighting For Vanity Mirrors
1. Check that fuse 3 is intact and supplied with current.
2. Check switches 373 and 374.
3. Check the switches on each lamp.
4. Check the connectors, wiring harness and ground connections.