US and CA Markets

FAULT DIAGNOSIS HINTS
The daylight driving lights are activated when ignition switch 20 is in the Drive position and light switch 10 is in position 0 or 1.
1. Check that fuses 5 and 6 (dipped beam) are intact and supplied with current.
2. Check that the lamps are intact and supplied with current. Check the grounding.
3. Check the light switch, relay 174 and the filament monitor connections.
4. Check the connectors, wiring harness and ground connections.

IMPORTANT: When changing the bulbs, make sure that the new bulbs are of the correct rating. Otherwise, the lamps in the pictogram may light up due to imbalance in the filament monitor coil.