Operation CHARM: Car repair manuals for everyone.

Rear Fog Lights

Cars for certain markets are fitted with a rear fog light. Before the rear fog light can be turned on, the ignition switch must be in the Drive position.

Current is supplied to light switch 10 via the ignition switch, which must be in position 2 for the rear fog light to light up (headlamps on).

Current is then supplied to the switch for rear fog light 161 via the switch for extra fog lights 88 and fuse 32. To enable the rear fog light to work on cars without extra fog lights, a jumper is connected via a 2-pin connector (H2-69).

When the rear fog light switch is depressed, rear fog light 33 lights up on the left-hand side on LHD cars and on the right-hand side on RHD cars. Indicator lamp 47N in the main instrument display panel also lights up.

At the same time as the switch is depressed, the lamp built into the button will be supplied with current directly and light up at full intensity.

The rear fog light on a trailer, if any, is supplied with current via connector 258 (H8-5).