Front A/C

Panel features, Left-hand part M1994-

1 AUTO button
Selects AUTO working mode, and the Automatic Climate Control (ACC) control module maintains the apparent cabin temperature constantly at the desired level.
The LED lights in AUTO working mode and stays lit even when the electrically heated rear window, rear door fans and air recirculation flap are manually activated and deactivated. In the case of other manual selections, the LED goes out.
The ACC system always starts in the AUTO working mode, provided it has not been otherwise programmed.

2 ECON button
Prevents activation of the A/C system and recirculation. Other functions are controlled automatically. The ECON LED lights.

3 OFF button
Selects OFF working mode if the ACC system is running or if previous manual selections in the ACC system are already disconnected. When OFF working mode is selected, the ACC control module continues to monitor temperature.

4 Display
The display shows the selected temperature in the cabin. The display shows "HI" if the selected temperature is above +27° C (81° F) or "LO" if the selected temperature is below +17° C (63° F).
When the ignition is switched on, the ACC system starts at the temperature that was programmed when the ignition was last switched off.

5 °C / °F button
Switches display temperature to °C or °F.

6 Temperature buttons
Increasing or decreasing desired cabin temperature.

Set temperature shown on display.







Panel features, Right-hand part M1994-

1 Electrically heated rear window
Connecting and disconnecting relay for electrically heated rear window or electrically heated door mirrors. Feature is activated for 11 minutes when it is manually selected or in AUTO working mode.
The LED lights when the feature is activated.

2 Rear door fans
Engaging and disengaging rear door fans. LED lights when fans are engaged.
Door fan speed is regulated in relation to ventilation fan speed, whether switched on manually or automatically.

3 Recirculation
Selects fresh air or recirculated air. LED lights when recirculation is selected.

4 Fan speed
Increasing or decreasing ventilation fan speed. When fan speed is automatically controlled, the LED between the two buttons lights.
When fan speed is increased manually, the upper LED lights and when fan speed is reduced the lower LED lights.

5 Air distribution
Selects air distribution as indicated.
In all flap positions an LED lights for the selected position. For flap positions between these angles in AUTO working mode, the center LED lights.