Diagnosis
When carrying out fault diagnosis, use is made of the Cruise Control system's switches as well as the clutch and brake pedals. On cars with automatic transmission, use is made of the Cruise Control system's switches, the brake pedal and selector lever.
Start fault diagnosis by checking:
1 The fuses.
2 The ignition.
3 Grounding.
4 The pins of the male control module connector for possible slide-out.
Fault diagnosis is carried out in the diagnostics mode. To enter the diagnostics mode, see table.
To leave the diagnostics mode, increase the speed of the car to more than 32 km/h (20 mph) or switch off the ignition.
If you happen to make a mistake while in the diagnostics mode, you will be returned automatically to point 5 and will have to start afresh from there.