Suspension Rail For Headlight Beam Alignment

An example is given of a measured area with a 3.5 meters roof height and travelling tube at 3 meters. The 40 x 4O x 3.2 mm bearing rail is welded in place onto the roof bracket that is produced in relation to the construction of the building. The maximum distance between the roof brackets should be 2.5 meters. For the installation of running rail see the picture. The running rail 4O x 4O x 3.2 is installed to the bracket with bolts or welded joints. The running rail should be installed horizontally. It is also important that the upper and under points of the running rail are installed horizontally.

The following equipment is compatible:
- Bosch VKR