Operation CHARM: Car repair manuals for everyone.

Starting System








Starting System Wiring Diagram

Components
1 Battery in the engine bay
4 Starter motor
20 Ignition switch between the front seats.
22A Main fuse board, dashboard
239 Transmission range switch 2, automatic transmission (31, 77)
463 Antenna unit, immobilizer by ignition switch
501 Main fuse board, maxi fuses, behind battery in engine bay
517 Starter relay
540A Main instrument unit on the dashboard
632 Control module, TWICE

Connectors
H10-7 Under the battery tray
H70-1 In centre of bulkhead partition (engine bay side)
H80-1 In connector bracket under LH A-pillar

Crimp connections
J49(LHD) Approx. 170 mm form main maxi fuse board
J49(RHD) Approx. 220 mm form main maxi fuse board
J50(LHD) Approx. 290 mm from ignition switch branching point towards grounding point G41P
J50(RHD) Approx. 290 mm from ignition switch branching point towards SID
J55 (LHD) Approx. 125 mm from DICE branching point towards H43-1
J55 (RHD) Approx. 130 mm from grounding point G42 branching point towards DICE
J117 Crimp connector approx. 50 mm from RH seat branching point towards RH rear door

Grounding points
G2 On left-hand side of the structural member behind the headlamp
G24 Behind seat member under RH seat
G25 On the gearbox